Similar symptoms. Different causes.
A washer can stop because of an unbalanced load, a drain restriction, a door-lock issue, or a fault in a pump, drive, or control. The same error code can have different meanings across brands. Describe the stage at which the machine stops instead of buying a part based on a symptom alone.
| What you notice | What could be involved |
|---|---|
| Water stays in the drum | A drain restriction, pump, or control issue |
| Won’t spin or shakes heavily | Load balance, installation, suspension, or drive issue |
| Door stays locked or cycle stops | Door-lock, water-level, drainage, or control issue |
These are possibilities, not a diagnosis. Your model and diagnostic checks determine the cause.
What can you check before calling?
Stay with controls and parts your owner’s manual identifies as user-accessible. Do not remove panels, move heavy appliances, or test electrical circuits.
Read the display
Photograph any error code and consult the model’s manual. Note which cycle was selected.
Check the load
If the controls allow and the drum has stopped, follow the manual’s instructions for an unbalanced load. Never force a locked door.
Look at the visible drain hose
Without moving the washer, check the accessible hose for a sharp kink. Do not disconnect a hose while water is inside.
When should you stop using it?
Stop the cycle if the washer is leaking, banging violently, or giving off a burning smell. Do not reach into a moving drum or force a door open. If water is near electrical connections, avoid touching the appliance.
What helps prepare for a diagnosis?
Write down the error code, cycle stage, and whether water remains in the drum. Mention if the washer is stacked, installed in a closet, or upstairs.
When you call, ask about the next available visit, diagnostic charges, and who can authorize the work. The cause needs to be established through diagnosis; a symptom alone does not determine the cost or the part needed.
Major brands, at your Broward home.
We work on appliances from Whirlpool, Samsung, LG, GE, KitchenAid, Maytag, Bosch, and other brands. Parts availability and the specific model affect the repair. See all brands.